|
REPSOL HIDR�LEO
- Maximum quality oils for hydraulic circuits.
Since they are ash-free oils, their use is recommended in hydraulic systems under
very severe operating conditions and where the filterability is very demanding:
servovalves, robotics, etc.
|
Grades ISO 32,
46, 68 y 100 |
|
|
REPSOL TELEX E
The Telex E oils can be divided into two categories:
TELEX E grades ISO 5 y 10 :mineral oils with special
additives that improve protection against corrosion and
aging. Recommended for very precise circuits. They are
protected against formation of sludges and rubbers.
TELEX E grades ISO 15, 22, 32, 46, 68 y 100 :
Telex
E oils with strengthened anti-wear properties, they
possess a higher load capacity than normal Telex oils.
They are recommended for hydraulic circuits when
working at high pressures. They satisfactorily meet the
maximum anti-wear levels demanded by international
standards.
REPSOL TELEX
Specially designed for hydraulic circuits, the base oils used in their formulation are
carefully selected to give them great natural stability. This and other properties of this range of oils are strengthened with the incorporation
of specific additives, thereby obtaining a product recognised throughout the world by
its "Telex" brand name.
|
Grades ISO 22,
32, 46, 68 y 100 |
|
|
REPSOL TELEX H.V.L.P.
Lubricants recommended for hydraulic circuits subject to large temperature changes
and in which the highest levels are demanded in terms of anti-wear EP properties.
|
REPSOL HYDROFLUX
E.P.
General purpose hydraulic oils, suitable for all types of circuit, including those
requiring special anti-wear protection.
|
Grades ISO 22,
32, 68, 100 y 150 |
|
|
REPSOL HIDR�ULICO
C-3E.P.
Hydraulic transmission fluids with a special additive permitting them to comply with
the demands required by GM under the name Allison type C-3.
|
REPSOL TELEX W
Specially suitable for hydraulic circuits operating under very severe working conditions
and systems subject to extreme temperature and pressure conditions.
Primarily recommended for Public Works machinery requiring a quality level
MIL-L-2104 E in grade SAE 10W20 for the hydraulic oil.
|
|